更换后、IOM在机箱中显示"未安装"

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

ONTAP 9
AFF A300
DS224C 磁盘架
IOM12模块

问题描述

发现IOM12模块出现故障
已更换此模块
IOM模块随后显示为"Not installed"

node1> storage show fault -v

Enclosure Status: critical

Channel: 0d

Shelf: 10

Shelf Type: DS224-12

Product Serial Number: 021919025151

Module Type: IOM12

Enclosure Electronics:

Element Status Status Bytes Status Descriptions

1 [IOM12 A] : OK 01,00,01,00 REPORT

2: NOT INSTALLED 05,00,00,00

Enclosure:

Element Status Status Bytes Status Descriptions

1: OK 01,00,02,00 FAIL

Vendor Unique Element 83-IOM12: (SAS)

Element Status Status Bytes Status Descriptions

1 [IOM12 A] : OK 01,08,00,20 MASTER, RESERVED

2: NOT INSTALLED 05,00,00,00

Vendor Unique Element 85-IOM12: (ACP)

Element Status Status Bytes Status Descriptions

1 [IOM12 A] : CRITICAL 02,18,00,40 NO ACPP, INBACP, FAIL

2 : NOT INSTALLED 05,18,00,00

在 sysconfig -a 输出中发现模块缺失

Cluster::> run -node node1 sysconfig -a

slot 0: SAS Host Adapter 0d (PMC-Sierra PM8072 rev. C, SAS, <UP>)
 Firmware rev: 03.08.09.00
 Base WWN: 5:00xxxx:00xxxxx:xx
 Temperature: Not Available
 Phy State: [4] Enabled, 12.0 Gb/s
 [5] Enabled, 12.0 Gb/s
 [6] Enabled, 12.0 Gb/s
 [7] Enabled, 12.0 Gb/s
 Mini-SAS HD Vendor: Molex Inc.
 Mini-SAS HD Part Number: 112-00437+A0
 Mini-SAS HD Type: Passive Copper (unequalized) 2m ID:01
 Mini-SAS HD Serial Number: 119631387

10.0 : NETAPP X371_SLBPE960ATE NA50 915.4GB 520B/sect .. 10.23: NETAPP X371_SLBPE960ATE NA50 915.4GB 520B/sect Shelf 10: DS224-12 Firmware rev. IOM12 A: 0281 B: ----