ONTAP降级后、Emulex FC适配器处于脱载状态

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

AF/FAS型号
ONTAP 9.8p6或更低版本
Emulex LPe35000 (LPe35004) FC适配器(部件号X1154)

问题描述

将ONTAP降级到9.8P7以下的版本后、 Emulex LPe35000 (LPe35004)适配器端口将保持脱机状态
"Sysconfig -a"输出将适配器报告为 <offlined by system>

slot 2: Fibre Channel Target Host Adapter 2a

(Emulex LPe35000 (LPe35004) rev. 0, <OFFLINED BY SYSTEM>)

Firmware rev: 0.0.0.0

Host Port Addr: 000000

FC Nodename: 50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)

FC Portname: 50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)

Connection: No link

Switch Port: Unknown

slot 2: Fibre Channel Target Host Adapter 2b

(Emulex LPe35000 (LPe35004) rev. 0, <OFFLINED BY SYSTEM>)

Firmware rev: 0.0.0.0

Host Port Addr: 000000

FC Nodename: 50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)

FC Portname: 50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)

Connection: No link

Switch Port: Unknown

slot 2: Fibre Channel Target Host Adapter 2c

(Emulex LPe35000 (LPe35004) rev. 0, <OFFLINED BY SYSTEM>)

Firmware rev: 0.0.0.0

Host Port Addr: 000000

FC Nodename: 50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)

FC Portname: 50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)

Connection: No link

Switch Port: Unknown

slot 2: Fibre Channel Target Host Adapter 2d

(Emulex LPe35000 (LPe35004) rev. 0, <OFFLINED BY SYSTEM>)

Firmware rev: 0.0.0.0

Host Port Addr: 000000

FC Nodename: 50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)

FC Portname: 50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)

Connection: No link

Switch Port: Unknown

适配器上的固件将显示0．0．0．0
降级ONTAP固件期间的事件日志将在降级HBA固件时显示错误

8/30/2023 18:59:39 Node-01 ERROR scsitarget.slifct.fwUpdErr: FC target HBA 2d failed to update

the firmware version from 12.8.435.3 to 12.4.320.1 with the status of 1.

8/30/2023 18:59:38 Node-01 ERROR scsitarget.slifct.fwUpdErr: FC target HBA 2c failed to update

the firmware version from 12.8.435.3 to 12.4.320.1 with the status of 1.

8/30/2023 18:59:38 Node-01 ERROR scsitarget.slifct.fwUpdErr: FC target HBA 2b failed to update

the firmware version from 12.8.435.3 to 12.4.320.1 with the status of 1.

8/30/2023 18:59:38 Node-01 ERROR scsitarget.slifct.fwUpdErr: FC target HBA 2a failed to update

the firmware version from 12.8.435.3 to 12.4.320.1 with the status of 1.

8/30/2023 19:01:04 Node-01 ERROR scsitarget.fct.port.offline: Fibre Channel Target port 2d was

taken operationally offline due to too many errors received by the FCT driver.

8/30/2023 19:01:04 Node-01 ALERT scsitarget.hwpfct.initFailed: Initialization of adapter failed

on Fibre Channel target adapter 2d.

8/30/2023 19:01:04 Node-01 ERROR scsitarget.fct.port.offline: Fibre Channel Target port 2c was

taken operationally offline due to too many errors received by the FCT driver.

8/30/2023 19:01:04 Node-01 ALERT scsitarget.hwpfct.initFailed: Initialization of adapter failed

on Fibre Channel target adapter 2c.

8/30/2023 19:01:04 Node-01 ERROR scsitarget.fct.port.offline: Fibre Channel Target port 2b was

taken operationally offline due to too many errors received by the FCT driver.

8/30/2023 19:01:04 Node-01 ALERT scsitarget.hwpfct.initFailed: Initialization of adapter failed

on Fibre Channel target adapter 2b.

8/30/2023 19:01:04 Node-01 ERROR scsitarget.fct.port.offline: Fibre Channel Target port 2a was

taken operationally offline due to too many errors received by the FCT driver.

8/30/2023 19:01:04 Node-01 ALERT scsitarget.hwpfct.initFailed: Initialization of adapter failed

on Fibre Channel target adapter 2a.