Emulex FC HBA 端口已通过 SRAM 转储重置
Knowledge Base guidance
This article may include metadata, visibility, validation state, and related support guidance.
适用场景
- ONTAP 9
- 光纤通道
- Emulex HBA
问题描述
- 间歇性路径丢失或延迟增加
- EMS 日志条目（ A ）：
fct_tpd_thread_6: scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 10c. The adapter will be automatically reset to clear the status:0x87800000, status1:0x52004c62, status2:0x610102, DIP:1, RN:1, RDY:1, Dump owner:6 condition.fct_tpd_thread_2: scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 2c. The adapter will be automatically reset to clear the status:0x87800000, status1:0x52004c62, status2:0x610102, DIP:1, RN:1, RDY:1, Dump owner:2 condition.- EMS 日志条目（ b ）：
fct_tpd_thread_7: scsitarget.fcp.dump:debug]: FCP target SRAM dump generated for adapter 10d, fct_tpd_check_hung_commands: Command termination hung. cmd:0xfffff817f82e3288 (state=0xa, flags=0x2,ctio_sent=1/2, RecvExAddr=0x19a5, OX_ID=0x43fc, RX_ID=0xffff, SID=0x153476)
- EMS 日志条目（ c ）：
fct_tpd_thread_2: scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 2c. The adapter will be automatically reset to clear the status:0x81800000, status1:0x52004a01, status2:0x218, DIP:0, RN:1, RDY:1, Dump owner:-1 conditionfct_tpd_thread_2: scsitarget.fcp.dump:debug]: FCP target SRAM dump generated for adapter 2c, FW FATAL ERR err_word1:1375750657 err_word2:536