磁盘架无法识别一个IOM模块

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

DS212-12
DS224-12
重新拔插出现故障的IOM12未解决此问题描述

问题描述

磁盘架无法识别一个IOM模块。
IOM模块LED不亮。

ENVIRONMENT.txt Shelf: XXX SES device path: local access: 0b.XXX.99 Module type: IOM12; monitoring is active Shelf status: critical condition SES Configuration, shelf XXX: vendor identification=NETAPP product identification=DS212-12 product revision level=0220 Vendor-specific information:

STORAGE-FAULT.txt Vendor Unique Element 83-IOM12: (SAS) Element Status Status Bytes Status Descriptions 1 [IOM12 A] : OK 01,08,00,20 MASTER, RESERVED 2: NOT INSTALLED 05,00,00,00 Vendor Unique Element 85-IOM12: (ACP) Element Status Status Bytes Status Descriptions 1 [IOM12 A] : CRITICAL 02,18,00,40 FAIL 2: NOT INSTALLED 05,18,00,00

sysconfig -a: Shelf 0: DS212-12 Firmware rev. IOM12E A: 01XXX IOM12E B: 01XXX Shelf XXX: DS212-12 Firmware rev. IOM12 A: 0220 B: ---- Shelf 11: DS212-12 Firmware rev. IOM12 A: 0220 IOM12 B: 0220 Shelf 12: DS212-12 Firmware rev. IOM12 A: 0220 IOM12 B: 0220

重新拔插或更换磁盘架XXX IOM12 B模块未解决此问题描述。