节点重新启动后、A400 FC端口关闭

适用场景

• AFF A400
• ONTAP 9

问题描述

• 接管/恢复后、0e和0f端口状态为 LINK DISCONNECTED

slot 0: Fibre Channel Target Host Adapter 0e
         (Emulex LPe16000 (XE201) rev. 13, <LINK DISCONNECTED>)
         Firmware rev:    12.8.433.0
         Host Port Addr:   000000
         FC Nodename:     50:0a:09:80:80:f6:8b:e3 (500a098080f68be3)
         FC Portname:     50:0a:09:83:80:f6:8b:e3 (500a098380f68be3)
         Connection:     No link
         Switch Port:     Unknown
      SFP Vendor Name:   AVAGO
      SFP Vendor P/N:   AFBR-57F5MZ-NA1
      SFP Vendor Rev:   01
      SFP Serial No.:   AC2240J02R5
      SFP Connector:    LC
      SFP Capabilities:  4, 8, 16 Gbit/Sec
     slot 0: Fibre Channel Target Host Adapter 0f
         (Emulex LPe16000 (XE201) rev. 13, <LINK NOT CONNECTED>)
         Firmware rev:    12.8.433.0
         Host Port Addr:   000000
         FC Nodename:     50:0a:09:80:80:f6:8b:e3 (500a098080f68be3)
         FC Portname:     50:0a:09:84:80:f6:8b:e3 (500a098480f68be3)
         Connection:     No link
         Switch Port:     Unknown
      SFP Vendor Name:   AVAGO
      SFP Vendor P/N:   AFBR-57F5MZ-NA1
      SFP Vendor Rev:   01
      SFP Serial No.:   AC2240J036P
      SFP Connector:    LC
      SFP Capabilities:  4, 8, 16 Gbit/Sec

• 执行以下操作后、问题仍然存在
  • 执行LIF和端口donw/up
  • FC端口重置
  • 交换电缆
  • 更换交换机和存储端口SFP