发生repl.src.snaps.check.failed错误事件

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

ONTAP 9
SnapMirror

问题描述

repl.src.snaps.check.failed SnapMirror源节点上发生错误事件：

repl.src.snaps.check.failed:error]: SnapMirror operation failed because the reference and/or the transfer Snapshot copies on the source volume are either

a) from a release prior to Data ONTAP 8.2

b) captured in a nonclustered format

c) not upgraded to dual inode space.

These Snapshot copies cannot be used for logical transfer.

snapmirror show -destination-path 命令用于指示的错误详细信息 Last Transfer Error：

Last Transfer Error: Failed to start transfer for Snapshot copy "xxxxxx_2019-06-27_02". (Failed to start transfer. (Snapshot instanceUuid=4518c9fb-4ede-11e9-8995-xxxxxxxxxxxx versionUuid=4518c9fb-4ede-11e9-8995-xxxxxxxxxxxx logicalSnapId=24 is a pre-8.2 Snapshot copy on volume"Vserver UUID:srcVOL". Using a pre-8.2 Snapshot copy is not supported by this operation.)) Last Transfer From: srcSVM:srcVOL