通过 Emulex XE201 适配器看不到磁带库

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

ONTAP 9
Emulex XE201
Brocade 交换机

问题描述

连接到 Emulex XE201 适配器的磁带库不可见，无法用于备份：

sysconfig -A 在 NetApp 控制器中，显示 "？" 对于交换机端口：

 slot 1: FC Host Adapter 1d (Emulex XE201 rev. 48, N-port, <UP>) Board name: 111-02451 Serial Number: FP95235984 Firmware rev: 12.0.378.1 Host Port Id: 0xdfc00 FC Node Name: 2:000:00109b:9xxxxx FC Port Name: 1:000:00109b:9xxxxx SFP Vendor: EMULEX SFP Part Number: AFBR-57F5MZ-ELX SFP Serial Number: AD1946J0CKC SFP Capabilities: 4, 8 or 16 Gbit Link Data Rate: 8 Gbit Switch Port: ?

对应nsshowEmulex HBA 端口的交换机名称服务器（）中缺少 PortSymb

 N   0dfc00;    3;10:00:00:10:9x:xx:xx:xx;20:00:00:10:9x:xx:xx:xx; 0x00000003
      Fabric Port Name: 20:0f:50:eb:xx:xx:xx:xx
      Permanent Port Name: 10:00:00:10:9x:xx:xx:xx
      Port Index: 15
      Share Area: Yes
      Device Shared in Other AD: No
      Redirect: No
      Partial: No
      LSAN: No
      Device link speed: 8G

例如 nsshow ，不同适配器端口的预期输出：

 N 17fc00; 3;10:00:00:10:9x:xx:xx:xx;20:00:00:10:9x:xx:xx:xx; 0x00000003 PortSymb: [41] "NetApp FC Storage Adapter NetApp1:1b." Fabric Port Name: 20:0f:50:eb:xx:xx:xx:xx Permanent Port Name: 10:00:00:10:9x:xx:xx:xx Port Index: 15 Share Area: Yes Device Shared in Other AD: No Redirect: No Partial: No LSAN: No Device link speed: 8G