RHEL不检测MetroCluster远程LUN 最后更新 另存为PDF Closure Action:Select an actionApprovedRejectedGuide Link:Select rejection reason:Select a reasonInsufficient informationExisting KB updatedExisting KB availableContent not requiredPlease let us know what is missing:Existing KB Link:Additional Comments:Set the Confidence and Visibility correctly on the Capture Manager.Link the KB article to the Case. If you fail to link, the PAR will be scored as Capture Loss for the case owner. Views:Visibility:PublicVotes:0Category:ontap-9Specialty:san<a>2009577193.</a>Last Updated: 适用场景 ONTAP 问题描述 在运行/usr/bin/lun rescan-scsi-bus.sh的远程MetroCluster群集( MCC )上创建新LUN后，无法检测到新的LUN设备 两个站点的SAN帧状况均正常、ISL没有错误 porterrshow 表示无端口错误 ONTAP指示无SFP光纤问题描述 network fcp adapter show -node * -fields sfp-rx-power, sfp-tx-power, switch-port 已 检查并验证IMT 路径/FC链路延迟/跃点和距离符合规格 在本地网络结构/存储上检测到LUN 已[1] 检查故障排除和配置