CONAP-355932：在Sysconfig -a下、交换机端口显示为未知

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

问题描述

对于FC目标端口、交换机端口在ASUP中的Sysconfig -a下显示为未知。
只有在切换已连接的交换机端口或重新启动节点后、它才会开始显示交换机端口。

 
slot 1: Fibre Channel Target Host Adapter 1b
         (Emulex LPe32000 (LPe32004) rev. 12, <ONLINE>)
         Board Name:     111-03648
         Serial Number:    FP10469171
         Firmware rev:    14.0.505.31
         Host Port Addr:   0a1b00
         FC Nodename:     50:0a:09:80:80:24:7d:xx (500a098080247dxx)
         FC Portname:     50:0a:09:82:80:24:7d:xx (500a098280247dxx)
         Connection:     PTP, Fabric
         Switch Port:     Unknown
  SFP Vendor Name:   AVAGO
  SFP Vendor P/N:   AFBR-57G5MZ-ELX
  SFP Vendor Rev:
  SFP Serial No.:   AD1646GE03A
  SFP Connector:    LC
  SFP Capabilities:  8, 16, 32 Gbit/S