将 FlexVol 卷转换为 FlexGroup 失败

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

ONTAP 9.8

问题描述

无法将从 7- 模式系统过渡的卷转换为 FlexGroup

示例：

node::*> vol conversion start -volume vol1 -foreground true -vserver vserver01
 
 Error: command failed: Cannot convert volume "vol1" in Vserver "nas_svm" to a
 FlexGroup. Contact technical support for assistance. Reasons:
 * The volume is a transitioned volume.

node::*> vol conversion start -volume vol1 -foreground true -check-only true
 
 Error: command failed: Cannot convert volume "vol1" in Vserver "vserver01" to a FlexGroup. Correct the following issues and retry the command:
 * Cannot convert volume "vol1" because the destination "vol1" of a SnapMirror relationship is in the Broken-off state.  Issue Snapmirror resync, and then try conversion of the destination volume.
 * Cannot convert source volume "vol1" because destination volume "vol1_mirror" of the SnapMirror relationship with "vol1" as the source is not converted.  First check if the source can be converted to a FlexGroup volume using "vol
 conversion start -volume vol1 -convert-to flexgroup -check-only true". If the conversion of the source can proceed then first convert the destination and then convert the source.