vserver fcp topology show 命令输出未完成

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

ONTAP 9
FCP

问题描述

""vserver fcp topology show命令输出不完整，并且不包含所有逻辑接口

::> net int show -vserver vserver_1 (network interface show) Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- vserver_1 node_1_fc_lif_1 up/up 20:00:00:a0:xx:xx:xx:xx node_1 0e true node_1_fc_lif_2 up/up 20:01:00:a0:xx:xx:xx:xx node_1 0f true node_2_fc_lif_1 up/up 20:02:00:a0:xx:xx:xx:xx node_2 0e true node_2_fc_lif_2 up/up 20:03:00:a0:xx:xx:xx:xx node_2 0f true

在以下示例中，仅显示 3 个条目，而不是 4 个条目（对于每个 LIF ）：
:*> vserver fcp topology show Domain Logical Port Vserver LIF Name Id Name WWN Count ------- -------------- ------ ------------------- ----------------------- ----- vserver_1 node_1_fc_lif_1 1 switch1 10:00:c4:f5:7c:xx:xx:xx 24 node_1_fc_lif_2 1 switch2 10:00:c4:f5:7c:xx:xx:xx 24 node_2_fc_lif_1 1 switch1 10:00:c4:f5:7c:xx:xx:xx 24 3 entries were displayed.