storage show 故障报告 "enclosure bypassed"

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

ONTAP 9

问题描述

ENCLOSURE BYPASSED可在中找到 storage show fault。

> storage show fault -v
 Enclosure Status: non-critical
 Channel: 3c
 Shelf: 1
 Shelf Type: DS4246
 Product Serial Number: XXXXXXXXXXXX         
 Module Type: IOM6

Disk Elements:
 Element Status                  Status Bytes  Status Descriptions
 ...
  19 [Bay 19]: OK                01,13,00,00  
  20 [Bay 20]: NONCRITICAL       03,14,10,04   ENCLOSURE BYPASSED B, BYPASSED B
  21 [Bay 21]: OK                01,15,00,00  
 ...

sysconfig -a 显示受影响的磁盘正常。

slot 0: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C, SAS, <UP>) Firmware rev: 01.11.00.00 Base WWN: 5:00a098:0014dc6:88 Phy State: [0] Enabled, 6.0 Gb/s [1] Enabled, 6.0 Gb/s [2] Enabled, 6.0 Gb/s [3] Enabled, 6.0 Gb/s QSFP Vendor: Molex Inc. QSFP Part Number: 112-00176+A0 QSFP Type: Passive Copper 0.5m ID:00 QSFP Serial Number: 235621256 ... 01.19: NETAPP X308_SMNRY03TSSA NA00 2538.5GB 512B/sect (Z297CDM7) 01.20: NETAPP X308_THARR03TSSM NA00 2538.5GB 512B/sect (16S3K7ZUF) 01.21: NETAPP X308_THARR03TSSM NA00 2538.5GB 512B/sect (16SDK6P1F)