无法通过Loader更改BMC IP

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

AF-C800
ONTAP 9

问题描述

通过Loader将BMC IP从10.1.1.3更改为10.1.1.2。

LOADER-A*> sp setup -d=0 -a=10.1.1.2 -n=255.255.255.0 -g=10.1.1.1

从Loader进行更改后、将ONTAP启动到集群Shell、但10分钟后BMC IP 会同步回10.1.1.3、而不是10.1.1.1。

::> system service-processor show

Node Type Status Configured Version IP Address ------------- ---- ----------- ------------ --------- ------------------------- node01 BMC online true 10.9P2 10.1.1.3

SP-DEBUG-MLOG-TXT.GZ 在ONTAP启动期间报告BMC IP更新到10.1.1.3。

2025-03-17 08:04:51.959 [sp_applications_init] [rlm_mgmt]: BEGIN - bmc_netconfig_if = 1 2025-03-17 08:04:52.425 [sp_applications_init] [none]: orftp_rcvr_from_rlm get file (/etc/rlm_config_to_filer) success, it took 0 seconds 2025-03-17 08:04:52.425 [sp_applications_init] [rlm_mgmt]: rlmp_parse_stats_file: buf is version 10.9P2 2025-03-17 08:04:52.425 [sp_applications_init] [rlm_mgmt]: rlmp_parse_stats_file: buf is ip 10.1.1.3 2025-03-17 08:04:52.425 [sp_applications_init] [rlm_mgmt]: rlmp_send_config: -- updating config