更换磁盘后，磁盘仍保留在损坏的池中
This article may include metadata, visibility, validation state, and related support guidance.
适用场景
- FAS8040
- ONTAP 9
- NS224
问题描述
sysconfig -a即使在更换磁盘后、故障磁盘信息仍会显示在输出中。
slot 0: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C, SAS, <UP>)
Firmware rev: 01.12.09.00
Base WWN: 5:00a098:XXXXXX:a0
Phy State: [0] Enabled, 6.0 Gb/s
[1] Enabled, 6.0 Gb/s
[2] Enabled, 6.0 Gb/s
[3] Enabled, 6.0 Gb/s
QSFP Vendor: Amphenol
QSFP Part Number: 112-00178+A0
QSFP Type: Passive Copper 5m ID:00
QSFP Serial Number: APF16XXXX444W
03.2: NETAPP X316_HAKPE06TA07 NA00 5614.6GB 520B / sect (AAAAAAAA) (Failed)
- 更换的磁盘同时显示在备用池和损坏的池中。
Pool0 spare disks
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB / blks) Phys (MB / blks)
--------- ------ ------------- ---- ---- ---- ----- ----- ----- --------- --------------
spare 3b.03.2 3b 3 2 SA: B 0 FSAS 7200 5614621/11498743808 5625872/11521787400
Broken disks
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB / blks) Phys (MB / blks)
--------- ------ ------------- ---- ---- ---- ----- ----- ----- --------- --------------
failed 0a.03.2 0a 3 2 SA: A 0 FSAS 7200 5614621/11498743808 5625872/11521787400