由于HBA卡而降级OnlinePort_Alert

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

FAS或AFF系统

问题描述

DegradedOnlinePort_Alert 报告在中SYSTEM-HEALTH-ALERT.XML
在SYSCONFIG-A 中，Phy State 显示Disabled 。

SYSCONFIG-A：

slot 1: SAS Host Adapter 1d (PMC-Sierra PM8072 rev. C, SAS, <UP>)

MFG Part Number: Microsemi Corp. 110-03801 rev. A0

Part number: 111-03801+A0

Serial number: XXXXXXXXXXX

Date Code: 20180706

Firmware rev: 03.08.09.00

Base WWN: 5:0000d1:7048bcc:0c

Temperature: 44 C

Phy State: [4] Enabled, 12.0 Gb/s

[5] Disabled

[6] Enabled, 12.0 Gb/s

[7] Enabled, 12.0 Gb/s

在STORAGE-SHELF 中，显示了UNKWN LNK 。

STORAGE-SHELF：

Shelf name: 1d.shelf1

Shelf id: 1

Channel: 1d

Module: A

Shelf UID: XX:XX:XX:XX:XX:XX:XX:XX

Shelf S/N: XXXXXXXXXXXXXXX

Term switch: N/A

Shelf state: ONLINE

Module state: OK

Partial Path Link Invalid Running Loss Phy CRC Phy

Disk Port Timeout Rate DWord Disparity Dword Reset Error Change

Id State Value (ms) (Gb/s) Count Count Count Problem Count Count

--------------------------------------------------------------------------------------------------

[HST0/P0:0 ] OK 7 12.0 0 0 0 0 0 13

[HST1/P0:1 ] OK 7 12.0 0 0 0 0 0 13

[HST2/P0:2 ] OK 7 12.0 0 0 0 0 0 13

[HST3/P0:3 ] OK 7 12.0 0 0 0 0 0 13

[HST4/P1:0 ] EMPTY 7 NA 0 0 0 0 0 0

[HST5/P1:1 ] EMPTY 7 NA 0 0 0 0 0 0

[HST6/P1:2 ] EMPTY 7 NA 0 0 0 0 0 0

[HST7/P1:3 ] EMPTY 7 NA 0 0 0 0 0 0

[HST8/P2:0 ] OK 7 12.0 0 0 0 0 0 19

[HST9/P2:1 ] OK 7 12.0 0 0 0 0 0 19

[HST10/P2:2] UNKWN LNK 7 NA 0 0 0 0 0 18

[HST11/P2:3] OK 7 12.0 0 0 0 0 0 19

[HST12/P3:0] EMPTY 7 NA 0 0 0 0 0 0

[HST13/P3:1] EMPTY 7 NA 0 0 0 0 0 0

[HST14/P3:2] EMPTY 7 NA 0 0 0 0 0 0

[HST15/P3:3] EMPTY 7 NA 0 0 0 0 0 0

即使在更换了缆线和连接到该缆线的IOM后、问题描述仍然存在。