部分传感器信息无效

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

FAS9500

问题描述

BMC 升级后，一些传感器显示invalid在/usr/local/bin/environ -show_all的面积SP-LATEST-IPMI日志。

/usr/local/bin/environ -show_all

================================

Sensor Name State Current Critical Warning Warning Critical

Reading Low Low High High

-------------------------------------------------------------------------------------------------

PSU3 need replacement invalid --

PSU1 need replacement invalid --

PSU3 invalid --

PSU1 invalid --

但这些传感器在其他区域显示正常状态（例如：/usr/local/bin/ipmi sensors ）的SP-LATEST-IPMI日志。

PSU1_Status | 0x0 | discrete | AC OK | na | na | na | na PSU1_12V_OP_I | 37.000 | Amps | ok | 0.000 | 0.000 | 140.000 | 144.000 PSU1_12V_OP_V | 12.060 | Volts | ok | 10.980 | 11.400 | 12.900 | 13.500 PSU1_AC_IP_I | 2.170 | Amps | ok | na | na | 14.000 | 14.980 PSU1_AC_IP_V | 230.000 | Volts | ok | 88.000 | 90.000 | 255.000 | 255.000 PSU1_Fault | 0x0 | discrete | Deasserted | na | na | na | na

PSU3:

PSU3_Status | 0x0 | discrete | AC OK | na | na | na | na PSU3_12V_OP_I | 37.000 | Amps | ok | 0.000 | 0.000 | 140.000 | 144.000 PSU3_12V_OP_V | 12.060 | Volts | ok | 10.980 | 11.400 | 12.900 | 13.500 PSU3_AC_IP_I | 2.100 | Amps | ok | na | na | 14.000 | 14.980 PSU3_AC_IP_V | 230.000 | Volts | ok | 88.000 | 90.000 | 255.000 | 255.000 PSU3_Fault | 0x0 | discrete | Deasserted | na | na | na | na