重新拔插后、AFF A300 FC端口未启动
Knowledge Base guidance
This article may include metadata, visibility, validation state, and related support guidance.
适用场景
- AFF A300
- ONTAP 9
问题描述
- 重新拔插节点后、根据EMS日志、光纤通道端口未正常启动：
[Node-01: isp2400_asyncd_0: fci.adapter.link.online:info]: Fibre Channel adapter 0 link online.
[Node-01: isp2400_intrd: fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 0 reports the presence of no Fibre Channel devices
- FC适配器显示的端口不正确、固件版本与重新拔插前不同、并且未显示交换机信息：
之前：
slot 0: Fibre Channel Target Host Adapter 0e
(QLogic 8324 (8362) rev. 2, <ONLINE>)
Firmware rev: 8.9.0
Flash rev: 5.0.2
(...)
Switch Port: FC-Switch1:0
之后：
slot 0: FC Host Adapter 0 (QLogic 8324 rev. 2, N-port, <UP>)
Firmware rev: 8.9.1
Flash rev: 5.0.2
(...)
Switch Port: ??
- 在启动时的控制台日志中、我们会看到以下内容：
BIOS POST Failure(s) detected: PCIe device missing error detected. Abort AUTOBOOT