升级参考配置文件(RCF)时出错

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

Cisco Nexus集群和存储网络交换机
参考配置文件（ RCF ）

问题描述

升级RCF文件时显示^错误。

40gj3-rtp-1(config)# #********** Intra-Cluster ISL ports ********** 40gj3-rtp-1(config)# 40gj3-rtp-1(config)# interface Ethernet1/31 40gj3-rtp-1(config-if)# description Intra-Cluster Switch ISL Port 1/31 (port channel) 40gj3-rtp-1(config-if)# priority-flow-control mode auto ^ % Invalid command at '^' marker. 40gj3-rtp-1(config-if)# switchport mode trunk ^ % Invalid command at '^' marker. 40gj3-rtp-1(config-if)# switchport trunk allowed vlan 1 ^ % Invalid command at '^' marker. 40gj3-rtp-1(config-if)# mtu 9216 ^ % Invalid command at '^' marker. 40gj3-rtp-1(config-if)# channel-group 1 mode active 40gj3-rtp-1(config-if)# no shutdown 40gj3-rtp-1(config-if)# 40gj3-rtp-1(config-if)# interface Ethernet1/32 40gj3-rtp-1(config-if)# description Intra-Cluster Switch ISL Port 1/32 (port channel) 40gj3-rtp-1(config-if)# priority-flow-control mode auto ^ % Invalid command at '^' marker. 40gj3-rtp-1(config-if)# switchport mode trunk ^ % Invalid command at '^' marker. 40gj3-rtp-1(config-if)# switchport trunk allowed vlan 1 ^ % Invalid command at '^' marker. 40gj3-rtp-1(config-if)# mtu 9216 ^ % Invalid command at '^' marker. 40gj3-rtp-1(config-if)# channel-group 1 mode active 40gj3-rtp-1(config-if)# no shutdown 40gj3-rtp-1(config-if)# 40gj3-rtp-1(config-if)# interface port-channel1 40gj3-rtp-1(config-if)# service-policy input ROCE_QOS Unable to perform the action due to incompatibility: Module 1 returned status "TCAM region is not configured. Please configure TCAM region and retry the command"

40gj3-rtp-1(config-if)# priority-flow-control mode auto 40gj3-rtp-1(config-if)# switchport mode trunk 40gj3-rtp-1(config-if)# switchport trunk allowed vlan 1 40gj3-rtp-1(config-if)# mtu 9216 40gj3-rtp-1(config-if)# no shutdown 40gj3-rtp-1(config-if)# 40gj3-rtp-1(config-if)# end