Brocade风扇转速下降、转速恢复正常
Knowledge Base guidance
This article may include metadata, visibility, validation state, and related support guidance.
适用场景
Brocade FOS v8.2.2和以下版本
问题描述
风扇降至RPM阈值以下、然后再次旋转至正常状态
错误:
CHASSIS, ERROR, BrocadeG620, Fan 2 sensor 1 , speed (2649 RPM) below threshold.
CHASSIS, ERROR, BrocadeG620, Fan 2 set to faulty, rc=20006.
CHASSIS, INFO, BrocadeG620, Fan 2 is no longer faulted.
CHASSIS, ERROR, BrocadeG620, Fan 2 sensor 1 , speed (2649 RPM) below threshold.
CHASSIS, ERROR, BrocadeG620, Fan 2 set to faulty, rc=20006.
CHASSIS, INFO, BrocadeG620, Fan 2 is no longer faulted.
CHASSISCMD /fabos/cliexec/fanshow:
********************************************************
/fabos/cliexec/fanshow:
Fan 1 is Ok, speed is 8043 RPM
Fan 2 is Ok, speed is 8341 RPM
errshow -r
Fabric OS: v8.2.2
EM-1037], 1506, CHASSIS, INFO, BrocadeG620, Fan 2 is no longer faulted.
Type to continue, Q to stop:
[HIL-1301], 1505, CHASSIS, WARNING, BrocadeG620, 1 blower failed or missing. Replace failed or missing blower assembly immediately.
Type to continue, Q to stop:
[EM-1034], 1504, CHASSIS, ERROR, BrocadeG620, Fan 2 set to faulty, rc=20006.
Type to continue, Q to stop:
[HIL-1206], 1503, CHASSIS, ERROR, BrocadeG620, Fan 2 sensor 1 , speed (2649
RPM) below threshold.
Type to continue, Q to stop:
[EM-1037], 1502, CHASSIS, INFO, BrocadeG620, Fan 2 is no longer faulted.