H410S上的SensorReadingFaif警报

最后更新
另存为PDF

Knowledge Base guidance

This article may include metadata, visibility, validation state, and related support guidance.

适用场景

NetApp Element软件
NetApp H410S (H300S、H500S、H700S)

问题描述

SolidFire ActiveIQ中可能会显示以下错误：

Error checking sensor for Inlet Temp (10193x)
Error checking sensor for FanX RPM (10193x)

同时，从管理节点(mNode)运行ipmitool时，各种Temp传感器的输出将显示 Fail 状态(而不是预期的 OK)：

sudo ipmitool -I lanplus -H <node-BMC-IP-address> -U <BMC-username> -P <BMC-password> sdr

sfadmin@NODE /usr/bin $ sudo ./smc-ipmicfg -sdr Status | (#)Sensor | Reading | Low Limit | High Limit | ------ | --------- | ------- | --------- | ---------- | Fail | (4) CPU1 Temp | N/A | N/A | 98C/208F | Fail | (71) CPU2 Temp | N/A | N/A | 98C/208F | Fail | (138) PCH Temp | N/A | 5C/41F | 95C/203F | Fail | (205) System Temp | N/A | -5C/23F | 85C/185F | ---omitted---